Notes for track overturning machine

To carry out better daily maintenance of mechanical equipment is a necessary condition to ensure the smooth application of machinery and equipment. Mechanical equipment selection extruder screw shaft hydraulic lifting special design scheme, in the change of work address and large rolover height, can adjust or lift to adjust the extruder screw and spot height, so as to facilitate the actual operation. It has the characteristics of tight design, easy to use and saving the workplace.

Maintenance mode of track tipping machine: regularly check whether all nut connections are loose; Regularly check whether the reverse roll leaf is damaged and the anchor bolt is loose; Check the support force of the drive belt inside the hubcap regularly; Lubricate the rolling bearing on time; Regular inspection of diesel engines; After 200 hours of operation of the hydraulic system, all gear oil should be avoided and manipulated, the residue in the filter device of the hydraulic system should be eliminated, and the filter element should be replaced. According to the cleanliness of the discharged gear oil, decide whether to reuse after filtration.

To carry out regular repair and maintenance of the track tipping machine can greatly improve the service time and characteristics of the machine equipment, reduce safety risks, and reduce the failure rate. And then increase the productivity of organic fertilizer. It is suggested to improve equipment maintenance rules and regulations.

As the main machine and equipment for aerobic compost fermentation, large and medium-sized track pile turning machine has been rapidly marketed and promoted in the field of organic fertilizer production equipment. It has become a contemporary industrial equipment that replaces manpower and forklifts to carry out raw material dumping and palletizing.

The main effect of compost turning machine in compost production. The mixing and crushing of alcohol producing raw materials were completed. When making fertilizer, it is necessary to add some auxiliary materials to adjust the organic matter, ph value and water content of the raw material. The key raw materials and a variety of auxiliary materials can be used to carry out the actual operation of mixing with the blender, stirring evenly and achieving the goal of adjusting the quality.